| ULTRA MAGNETIC
V BLOCKS |
|
 |
Used
for Grinding, Light Milling, Drilling & Inspection of Round &
Square Jobs.
Accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 6”L
& 0.010mm for 8” L of
"V"block
The Bigger V angle &bottom holding surface are equipped with
hardened strips for wear resistance.
Uniform and strong magnetic pull to all three magnetic surfaces Top,
Bottom & V face.
Hardness of V face is 60±2 Rc.
Powder Coated.
Easy ON- OFF facility.
120o " V " angle also available. |
Sr.No. |
Cat No. |
Size |
Range (mm) |
Pull |
| 1. |
UL-10101 Soft |
40L X 40W X
50H [2"] |
Ø 3 - Ø 25 |
25 Kg |
| 2. |
UL-10101 Hard |
40L X
40W X 50H [2"] |
Ø 3
- Ø 25 |
25 Kg |
| 3. |
UL-10102 Soft |
75L X
56W X 75H [3"] |
Ø 5 - Ø 40 |
75 Kg |
| 4. |
UL-10102 Hard |
75L X
56W X 75H [3"] |
Ø 5
- Ø 40 |
75 Kg |
| 5. |
UL-10103 Soft |
100L X
70W X 95H [4"] |
Ø 5 - Ø 65 |
100 Kg |
| 6. |
UL-10103 Hard |
100L X
70W X 95H [4"] |
Ø 5 - Ø 65 |
125 Kg |
| 7. |
UL-10104 Soft |
150L X
75W X 100H [6"] |
Ø 5 - Ø 70 |
125 Kg |
| 8. |
UL-10104 Hard |
150L X
75W X 100H [6"] |
Ø 5 - Ø 70 |
150 Kg |
| 9. |
UL-10105 Soft |
200L X
125W X I50H [8"] |
Ø 10 -
Ø 140 |
175 Kg |
| 10. |
UL-10105 Hard |
200L X
125W X I50H [8"] |
Ø 10 -
Ø 140 |
175 Kg |
|
| ULTRA HARDENED
& GROUND MAGNETEC V BLOCKS |
|
All sides are hardened & ground
Used for grinding, light Miliing, Drilling & inspection of round & square Jobs.
Accuracy for Flatness, squareness & parallelism within 0.005mm upto 150L & 0.010mm for 200L
Hardness upto 60 RC.
Supplied in matched pair.
Uniform and Strong magnetic pull to all three magnetic surfaces, Top, Bottom & V Faces.
Easy ON - OFF facility. 120° "V" angle also available. |
| |
Sr.No. |
Cat No. |
Size |
Range (mm) |
Pull |
| 1. |
UL-32001 Hard |
40L X 40W X
50H [2"] |
Ø 3 - Ø 25 |
25 Kg |
| 2. |
UL-32002 Hard |
75L X
56W X 75H [3"] |
Ø 5 - Ø 40 |
75 Kg |
| 3. |
UL-32003 Hard |
100L X
70W X 95H [4"] |
Ø 5 - Ø 65 |
100 Kg |
| 4. |
UL-32004 Hard |
150L X
75W X 100H [6"] |
Ø 5 - Ø 70 |
125 Kg |
| 5. |
UL-32005 Hard |
200L X
125W X I50H [8"] |
Ø 10 -
Ø 140 |
175 Kg |
|
|
|
| ULTRA HARDENED
& GROUND V BLOCKS |
|
|
Used for supporting of round
and square jobs during Light
machining, Grinding, Drilling & Inspection.
Accuracy for Flatness, Squareness and Parallelism within
±0.003mm.
Hardness 60±2 Rc.
Supplied in perfect matched pair.
Supplied with clamp.
Can also be used for end face, side face and right angle Grinding
|
Sr.No. |
Cat No. |
Size |
Range (mm) |
| 1. |
UL-10201 |
25L X 20W X
20H [1"] |
Ø 3 - Ø 20 |
| 2. |
UL-10202 |
50L X 20W X
20H [1"] |
Ø 5 - Ø 30 |
| 3. |
UL-10203 |
80L X 20W X
20H [1"] |
Ø 6 - Ø 50 |
| 4. |
UL-10204 |
100L X 20W X
20H [1"] |
Ø 6 - Ø 70 |
|
| ULTRA
HARDENED & GROUND V BLOCK WITH CLAMP |
|
Used for Grinding, Light
Milling, Drilling & Inspection
of Round & Square Jobs.
Accuracy as per IS - 2949 - 1992.
Hardness 60±2 Rc.
Supplied in perfect matched pair.
End face grinding, square with sides can be possible.
Two 90O "V" for different capacities.
Special sizes can also be manufactured.
Supplied with Clamp.
Also available to suite your specification. |
Sr.No. |
Cat No. |
Size |
Range (mm) |
| 1. |
UL-10501 |
50
L X 40 W X 40 H |
Ø
5 - Ø 40 |
| 2. |
UL-10502 |
50 L
X 50 W X 50 H |
Ø
5 - Ø 50 |
| 3. |
UL-10503 |
63 L
X 50 W X 50 H |
Ø
5 - Ø 50 |
| 4. |
UL-10504 |
63 L
X 80 W X 80 H |
Ø
7 - Ø 80 |
| .5 |
UL-10505 |
63 L
X 100 W X 100 H |
Ø
8 - Ø 100 |
| 6. |
UL-10506 |
70 L
X 140 W X140 H |
Ø
9 - Ø 140 |
| 7. |
UL-10507 |
80 L
X 63 W X63 H |
Ø
7 - Ø 63 |
| 8. |
UL-10508 |
100 L
X 80 W X 80 H |
Ø
7 - Ø 80 |
| 9. |
UL-10509 |
150 L
X 200 W X 200 H |
Ø
10 - Ø200 |
| 10. |
UL-10510 |
200 L
X 200 W X 200 H |
Ø
10 - Ø200 |
| 11. |
UL-10511 |
300 L
X 300 W X 300 H |
Ø
10 - Ø 300 |
|
| ULTRA HARDENED &
GROUND TOOL-ROOM V BLOCK |
 |
Used for Grinding, Light
Milling, Drilling & Inspection of Round & Square Jobs.
Accuracy for Flatness, Squareness and Parallelism within
±0.005mm.
Can be used on its base, the ends & on either side.
Hardness 60±2 Rc.
M10 tapping at base M8 tapping on side for clamping on angle plate or
face plate or on magnetic chuck.
A clamp with cap & adjustable screws prevents tilting of block.
A clearance hole at centre for drilling or removing of dowel pins.
The "V" at stepped end at right angle to the base provides a
handy means for holding shouldered studs round pins etc.
|
Sr.No. |
Cat No. |
Size |
Range (mm) |
| 1. |
UL-10801 |
48
square x 90 l. |
Ø
5 - Ø 33 |
|
| ULTRA ROLLER BEARING V
BLOCK |
|
|
Used for checking heavy and
odd shaped round jobs.
Perfectly matched pair having accuracy 0.005mm.
Included angle of rollers is 90º.
Standard bearings are used which are replaceable.
Jobs don't get damaged due to bearing on top.
Special sizes suitable for different diameter can also be
manufactured. |
Sr.No. |
Cat No. |
Size Top |
Size Bottom |
Hieght |
Range (mm) |
Load
Capacity |
| 1. |
UL - 11001 |
150 L x 40 W |
150 L x 80 W |
100 h |
Ø 3 - Ø 55 |
1000 Kg |
| 2. |
UL - 11002 |
150 L x 22 W |
150 L x 60 W |
100 h |
Ø 25 - Ø70 |
500 Kg |
| 3. |
UL - 11003 |
230 L x 60 W |
230 L x 100 W |
150 h |
Ø 70 - Ø200 |
1000 Kg |
|
| |
|
| ULTRA POT MAGNET |
|
|
Used for lifting holding &
locating of ferrous parts.
Compact deign with very strong magnetic pull.
Tapped hole on rear of magnetic face for
lifting arrangement.
Special sizes can also be manufactured. |
Sr.No. |
Cat No. |
Size |
Tapping |
Pull |
| 1. |
UL-20501 |
Ø 18 x 16 H |
M6 |
2 kg |
| 2. |
UL-20502 |
Ø 22 x 20 H |
M6 |
3 kg |
| 3. |
UL-20503 |
Ø 27 x 25 H |
M8 |
6.5 kg |
| 4. |
UL-20504 |
Ø 35 x 30 H |
M8 |
11.5 kg |
|
| ULTRA BUTTON MAGNET |
|
|
Used for lifting holding &
locating of ferrous parts.
compact design with strong magnetic pull.
Special sizes can also be manufactured. |
Sr.No. |
Cat No. |
Size |
Pull |
| 1. |
UL-20601 |
Ø 12 x 10 H |
0.6 kg |
| 2. |
UL-20602 |
Ø 20 x 12 H |
1.6 kg |
| 3. |
UL-20603 |
Ø 25 x 15 H |
4.0 kg |
|
| ULTRA MAGNETIC HOLDFAST |
|
|
Used for lifting holding &
locating of ferrous parts.
The Jack-off screw also serves as a handle.
Eye bolt for lifting.
Special sizes can also be manufactured. |
Sr.No. |
Cat No. |
Size |
Pull |
| 1. |
UL-20701 |
Ø
45 x 45 H |
30
kg |
| 2. |
UL-20702 |
Ø
55 x 50 H |
40
kg |
| 3. |
UL-20703 |
Ø
70 x 65 H |
50
kg |
| 4. |
UL-20704 |
Ø
100 x 75 H |
75
kg |
|
