“ULTRA”
COMPOUND SINE-TABLE IS : 5939- 1970 |
| |
|
Used for Precision
measurement, setting of angles & Light machining.
Accuracy for Square ness, Flatness & Parallelism
within 0.005mm upto 200L & 0.010mm upto 450L.
Angle can be set within ±5 seconds.
Centre Distance between rollers is within 0.005mm.
Made from high quality alloy steel
Compound Angle facility.
Hardness - 60 ± 2 Rc & Tempered.
Magnetic Table for job holding.
Firm hinged clamp to reduce possibility of distortion. |
Sr.
No |
Cat
No. |
Size
(mm) |
Bottom
C.D (mm) |
Top
C.D (mm) |
1. |
UL
- 40401 |
150
L x100 W x 155 H |
100 |
50 |
2. |
UL
- 40402 |
250
L x150 W x 155 H |
150 |
100 |
3. |
UL
- 40403 |
300
L x150 W x 155 H |
200 |
100 |
4. |
UL
- 40404 |
450
L x150 W x 155 H |
300 |
100 |
5. |
UL
- 40405 |
400
L x200 W x 155 H |
250 |
150 |
|
“ULTRA”
UNIVERSAL SURFACE GAUGE |
| |
|
Used for marking &
transferring measurement.
Ground base for accurate reference surfaces.
V groove on the front end which allows the spindle to
adjust to any angle above or below the base.
V groove in the base for cylindrical work.
A very positive fine adjustment through a rocker arm that
makes smooth & accurate setting.
Grooves on the side of the base for a sure & easy grip.
Dial indicator can also be used.
Two gauge pins facilitate easy linear marking. |
Sr.No. |
Cat
No. |
Size |
Height |
1. |
UL-
50101 |
80
L x 65 w x 300 H [12"] |
300 |
2. |
UL-
50102 |
100
L x85 W x 450 H [18"] |
450 |
3. |
UL-
50103 |
110
L x 90 W x 600 H [24"] |
600 |
|
“ULTRA”
HEAVY DUTY DIAL INDICATOR STAND |
| |
|
Used as holding device for
dial indicator.
Heavy & rigid construction.
Column can move to & fro to full base length.
Fine adjustment for accurate setting.
Both faces of base can be used. |
Sr.No |
Cat
No. |
Base
Size (mm) |
Height
Of Column (mm) |
Max.
Horizontal Ext. (mm) |
1. |
UL
-50301 |
250
L x 45 W |
300 |
350 |
2. |
UL
-50302 |
300L
x 100 W |
300 |
350 |
3. |
UL
-50303 |
300
L x 100 W |
500 |
350 |
4. |
UL
-50304 |
350
L x 100 W |
800 |
350 |
|
“ULTRA”
MAGNETIC BASES |
| |
|
Used as holding device for
dial indicator.
Base V can be clamped to shaft of Ø 20 to Ø 120.
Fine adjustment for accurate setting.
Powerful magnetic base holds firmly to ferrous surfaces
- Vertically , horizontally, upside - down.
ON - OFF facility. |
Sr.No. |
Cat
No. |
Base
Size (mm) |
Overall
height (mm) |
Pull |
1. |
UL
- 50401 |
64
L x 48 W x 55 H |
275 |
70
Kg |
|
“ULTRA”
MAGNETIC BASES |
| |
|
| |
|
Used as holding device for
dial indicator.
Heavy & rigid construction.
Base V can be clamped to shaft of Ø 20 to Ø 120
Fine adjustment for accurate setting.
Can hold 8mm & 6mm stem diameter of dial.
Two extension arm gives more flexibility in inspection. |
Sr.No |
Cat
No. |
Base
Size (mm) |
Overall
Height |
Main
Shaft |
Pull |
1. |
UL
- 50405 |
48
L x 42 W x 49 H |
220
mm |
12.7
x 185 mm |
40
Kg |
|
“ULTRA”
MAGNETIC BASES |
| |
|
Used as holding device for
dial indicator.
Permanent magnet base without ON-OFF.
Can hold 6mm & 8mm stem diameter of dial.
Light duty dial stand.
UL-50407 has an extension arm. |
Sr.No |
Cat
No. |
Base
Size (mm) |
Overall
Height |
Main
Shaft |
Pull |
1. |
UL
- 50407 |
41
x 38 H |
220
mm |
Ø12.5
x 180 mm |
25
Kg |
2. |
UL
- 50408 |
28
x 25 H |
90
mm |
----------- |
15
Kg |
|
| |
| “ULTRA”
MAGNETIC LAMP |
| |
|
Heavy & rigid Construction of base.
Can be locked to any position.
Base "v" can be clamped to shaft of ø 20 to ø 120.
on - off facility. |
Sr.No |
Cat
No. |
Base
Size (mm) |
Overall
Height |
Pull |
1. |
UL
- 50414 |
120 x 85w x 130H |
350
mm |
70
Kg |
|
| |
“ULTRA”
MAGNETIC BASES WITH FINE ADJUSTMENT |
| |
|
Used as holding device for
dial indicator.
Heavy & rigid construction of base & column.
Base V can be clamped to shaft.
Fine adjustment for accurate setting.
ON - OFF facility.
|
Sr.No |
Cat
No. |
Base
Size (mm) |
Overall
Height |
Main
Shaft |
Pull |
1. |
UL
- 50412 |
60
L x 50 W x 55 H |
230
mm |
Ø12
x 180 mm |
50
Kg |
|
“ULTRA”
UNIVERSAL CLAMPING MAGNETIC BASE with fine adjustment |
| |
|
Used as holding device for
dial indicator.
Heavy & rigid construction of base & column.
Can be locked to any position in 360º by a Central lock.
Dovetail slot for lever type dial.
Fine adjustment for accurate setting.
Base V can be clamped to shaft of Ø20 to Ø120.
Can Hold 8mm & 6mm stem diameter of dial.
|
Sr.No |
Cat
No. |
Base
Size (mm) |
Overall
Height |
Pull |
1. |
UL
- 50413 |
70
L x 48 W x 64 H |
230
mm |
70
Kg |
|
“ULTRA”
MAGNETIC TOOL SETTING GAUGE |
| |
|
Used with
boring bar for presetting of cutting tool.
Change in setting of the tool measures variation in bore
dimension.
Suitable clamp is provided for holding dial indicator
(for UL - 50504 & UL - 50505)
Powerful magnet with ON-OFF facility.
“V” is hardened & ground within 5 microns.
The included angle of V is 90º.
Hardness 52 - 56 Rc.
Can be manufactured as per customer's requirement. |
Sr.No. |
Cat
No |
Size
(mm) |
Slot
(mm) |
Range
(mm) |
1. |
UL
- 50501 |
72
L x 68 H x 35 T |
14
x 2 |
Ø
25 - Ø 70 |
2. |
UL
- 50502 |
76
L x 75 H x 35 T |
14
x 2 |
Ø
35 - Ø 90 |
3. |
UL
- 50503 |
80
L x 75 H x 40 T |
14
x 2 |
Ø
40 - Ø 105 |
4. |
UL
- 50504 |
100
L x 50 H x 40 T |
14
x 2 |
Ø
40 - Ø 125 |
5. |
UL
- 50505 |
120
L x 68 H x 35 T |
14
x 2 |
Ø
110 - Ø 180 |
|
“ULTRA”
MAGNETIC TOOL SETTING GAUGE |
| |
 |
Used with
boring bar for presetting of cutting tool.
Change in setting of the tool measures variation in bore
dimension.
Suitable clamp is provided for holding dial indicator.
Powerful magnet with ON-OFF facility.
“V” is hardened & ground within 5 micron.
The included angle of V is 120º.
Hardness 52 - 56 Rc.
Can be manufactured as per customer's requirement. |
Sr.No. |
Cat
No |
Size
(mm) |
Range
(mm) |
1. |
UL
- 50506 |
60
L x60 H x30 T |
Ø
10 - Ø 50 |
2. |
UL
- 50507 |
80
L x 80 H x 30 T |
Ø
10 - Ø 90 |
3. |
UL
- 50508 |
100
L x 100 H x 35 T |
Ø
10 - Ø 110 |
|
“ULTRA”
MAGNETIC TOOL SETTING GAUGE |
| |
|
Used with
boring bar for presetting of cutting tool
Change in setting of the tool measures variation in bore
dimension.
Powerful magnet without ON-OFF facility.
“V” is hardened & ground within 5 micron.
The included angle of V is 120º.
Hardness 52 - 56 Rc.
Can be manufactured as per customer's requirement.
|
Sr.No. |
Cat
No |
Size
(mm) |
Range
(mm) |
1. |
UL
- 50601 |
100
L x 50 H x25 T |
Ø
20 - Ø 90 |
2. |
UL
- 50602 |
110
L x 45 H x 22 T |
Ø20
- Ø 75 |
3. |
UL
- 50603 |
90
L x 40 H x 22 T |
Ø
45 - Ø 100 |
|
“ULTRA”
HARDENED & GROUND KNIFE-EDGE STRAIGHT EDGE |
| |
|
Used for checking flatness
& straightness of surfaces.
All accuracies as per IS : 3512 - 1966.
Made from high quality tool steel.
Knife edge provides an excellent visual line contact with the work
piece.
Hardness 60 ± 2 Rc.
Packed in individual wooden box.
|
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-60101 |
50 L
x 30 W x 8 T [ 2” ] |
2. |
UL-60102 |
75 L
x 35 W x 8 T [ 3” ] |
3. |
UL-60103 |
100
L x 40 W x 10 T [ 4” ] |
4. |
UL-60104 |
150
L x 40 W x 10 T [ 6” ] |
5. |
UL-60105 |
200
L x 50 W x 12 T [ 8” ] |
6. |
UL-60106 |
250
L x 50 W x 12 T [ 10” ] |
7. |
UL-60107 |
300
L x 60 W x 12 T [ 12” ] |
8. |
UL-60108 |
500
L x 60 W x 15 T [ 20” ] |
9. |
UL-60109 |
600
L x 60 W x 20 T [ 24” ] |
|
“ULTRA”
HARDENED & GROUND STEEL STRAIGHT EDGE |
| |
|
Used for checking flatness
& straightness of surfaces.
All accuracies as per IS : 2220 - 1962.
Made from high quality tool steel.
Hardness 60 ± 2 Rc.
Plastic head insulator.
Packed in individual wooden box.
|
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-60201 |
100 L
X 15 H X 5 T |
2. |
UL-60202 |
160 L
X 20 H X 8 T |
3. |
UL-60203 |
300
L X 35 H X 12 T |
4. |
UL-60204 |
500 L
X 50 H X 15 T |
5. |
UL-60205 |
800 L
X 80 H X 20 T |
6. |
UL-60206 |
1000 L
X 100 H X 20 T |
|
“ULTRA”
HARDENED & GROUND TRY - SQUARE.
Flat Edge Without Stock. |
| |
|
Used for checking Squareness
& straightness.
All accuracies as per IS : 2103 - 1980.
Made from single piece high quality tool steel.
Hardness 60 ± 2 Rc.
A groove on the inner corner of the stock, aids in the clearance of burr
or dirt.
Packed in individual wooden box.
|
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-60301 |
50 L
x 30 W x 4 T [ 2” ] |
2. |
UL-60302 |
75 L
x 50 W x 4.5 T [ 3” ] |
3. |
UL-60303 |
100
L x 70 W x 5 T [ 4” ] |
4. |
UL-60304 |
150
L x 100 W x 6 T [ 6” ] |
5. |
UL-60305 |
200
L x140 W x7 T [ 8” ] |
6. |
UL-60306 |
250
L x165 W x 8 T [ 10” ] |
7. |
UL-60307 |
300
L x 200 W x8 T [ 12” ] |
8. |
UL-60308 |
400
L x 250 W x 10 T [ 16” ] |
|
“ULTRA”
HARDENED & GROUND BEVELLED EDGE
TRY - SQUARE IS : 2103 - 1980. |
| |
|
Used for checking Square ness
& straightness.
Made from single piece high quality tool steel.
Inner & outer edges of blade are bevelled at 60º angle.
Beveled edge provides an excellent visual line contact
with the workpiece.
Hardness 60 ± 2 Rc.
A groove on the inner corner of the stock, aids in the
clearance of burr or dirt.
Packed in individual wooden box. |
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-60401 |
50 L
x 35 W x 4 T [ 2” ] |
2. |
UL-60402 |
75 L
x 50 W x 4.5 T [ 3” ] |
3. |
UL-60403 |
100
L x 70 W x 5 T [ 4” ] |
4. |
UL-60404 |
150
L x 100 W x 6 T [ 6” ] |
5. |
UL-60405 |
200
L x140 W x7 T [ 8” ] |
6. |
UL-60406 |
250
L x165 W x 8 T [ 10” ] |
7. |
UL-60407 |
300
L x 200 W x8 T [ 12” ] |
8. |
UL-60408 |
400
L x 250 W x 10 T [ 16” ] |
|
“ULTRA”
HARDENED & GROUND WITH STOCK
TRY - SQUARE |
| |
|
Used for checking Squareness
& straightness.
All accuracies as per IS : 2103 - 1980.
Made from single piece high quality tool steel.
Hardness 60 ± 2 Rc.
A groove on the inner corner of the stock, aids in the
clearance of burr or dirt.
Packed in individual wooden box.
|
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-60501 |
100
L x 70 W x 10 T [ 4” ] |
2. |
UL-60502 |
150
L x 100 W x 12 T [ 6” ] |
3. |
UL-60503 |
200
L x140 W x 15 T [ 8” ] |
4. |
UL-60504 |
250
L x 165 W x 20 T [ 10” ] |
5. |
UL-60505 |
300
L x200 W x20 T [ 12” ] |
6. |
UL-60506 |
400
L x250 W x 25 T [ 16” ] |
7. |
UL-60507 |
500
L x 300 W x 25 T [ 20” ] |
8. |
UL-60508 |
700
L x450 W x 30 T [ 28” ] |
9. |
UL-60509 |
1000
L x750 W x 40 T [ 40” ] |
|
“ULTRA”
HARDENED & GROUND FLANGED BEAM TRY - SQUARE |
| |
|
Used to check Squareness &
straightness.
Accuracy for Squareness & Flatness is within ±0.005 mm.
Made from single piece high quality tool steel.
Inside & outside are accurate right angles.
A groove on the inner corner of the stock, aids in the
clearance of burr or dirt.
Hardness 60 ± 2 Rc.
Packed in individual wooden box.
|
Sr.No. |
Cat
No |
Beam
Size
(mm) |
Cross Section (mm2) |
1. |
UL-60601 |
100
x 70 |
20
x 5 |
2. |
UL-60602 |
150
x 100 |
26
x6 |
3. |
UL-60603 |
200
x 130 |
32
x 7 |
4. |
UL-60604 |
300
x 200 |
40
x 8 |
|
| “ULTRA”
PERMANENT MAGNETIC SWEEPER |
|
Used for
collecting ferrous particles & scrap from floor space.
Good quality strong magnets are used.
Wheels for easy movement on floor.
Particles are released just by creating gap between bottom plate &
magnetic assembly by using foot.
42” long handle for easy working. |
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-20901 |
300
x 150 |
2. |
UL-20902 |
450
x 150 |
3. |
UL-20903 |
600
x 150 |
|
| |
| “ULTRA” HEAVY DUTY
PERMANENT MAGNETIC SWEEPER |
|
Used for
collecting ferrous particles & scrap from floor space.
Good quality strong magnets are used.
Wheels for easy movement on floor.
Can lift the job from 150mm
Useful for the shop floor & scrap yard.
Hydraulic jack for easy releasing. |
Sr.No. |
Cat
No |
Size
(mm) |
1. |
UL-21101 |
450
x 300 |
2. |
UL-21102 |
600
x300 |
3. |
UL-21103 |
900
x300 |
|
|
|
