:: PRODUCTS ::
 
 
ULTRA MAGNETIC CLAMPING BLOCK

ULTRA MAGNETIC CLAMPING BLOCK

Suitable for drilling & light machining.
Easy to operate.
Time saving as machincal clamps are avoided.
Economical for operation & maintenance.
Powerful holding with the magnet.
Vertical lifting force is 35 to 40 kg per cm sq.

 
Sr.No. Cat No. Size (mm)
1. UL-61201 120L x 85w x 130H
 
 
ULTRA MAGNETIC STICKS 

ULTRA MAGNETIC STICKS
Used for removing ferrous chips or particles from blind or taping holes, corners or slots of machine table.
Compact design, uses strong magnets. 
Magnet depth is 25mm from one end. 
Stainless steel body to avoid corrosion.
Special sizes can also be manufactured.
Sr.No. Cat No. Size (mm)
1. UL-20301  Ø 3 x 150 L 
2. UL-20302  Ø 5 x 150 L
3. UL-20303  Ø 6 x 150 L 
4. UL-20304  Ø 8 x 150 L
5. UL-20305  Ø 10 x 150 L
6. UL-20306 Ø 12 x 150 L 
7. UL-20307 Ø 14 x 150 L 
8. UL-20308  Ø 15 x 150 L
9. UL-20309  Ø 16 x 150 L
10. UL-20310 Ø 18 x 150 L 
ULTRA 10MAGNETIC SEPARATOR
.
ULTRA 10MAGNETIC SEPARATOR
Used for removing or collecting fine ferrous or 
ferromagnetic contaminants from oil tank or coolant tank.
Powerful magnet allows large collection of particles. 
Stainless steel body for rust prevention. 
Handle or eye bolt on top for easy handling. 
Available in different diameter & length. 
 
Sr.No. Cat No. Dia (inch.) Length (inch.)
1. UL-70101  1"  4, 5 , 6, 7, 8 
2. UL-70102  2" 6, 8, 10, 12, 14 
3. UL-70103  4"  6, 8, 10, 12, 16 
4. UL-70104  6" 8, 16, 24, 30, 36 

ULTRA PERMANENT MAGNETIC CHUCK (HEAVY DUTY) 

ULTRA PERMANENT MAGNETIC CHUCK
Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines. 
Accuracy as per IS : 4816 - 1987. 
Assembled with powerful Magnets. 
Poles individually magnetized for full loading power. 
Magnetic pull is 40-70% more than IS specification. 
Bottom plate has suitable extension to clamp on table. 
Easy operated ON-OFF lever. 
Sr.No. Cat No. Size Ploe Gap (mm) Pole Pitch (mm)
1. UL-70801  150 L x 100 W x 60 H  16 32
2. UL-70802  175 L x 125 W x 60 H  16 32
3. UL-70803  200 L x 100 W x 60 H 16 32
4. UL-70804  200 L x 150 W x 60 H  19 32
5. UL-70805  250 L x 150 W x 60 H 19 35
6. UL-70806  300 L x 150 W x 60 H  19 35
7. UL-70807  300 L x 200 W x 65 H  19 35
8. UL-70808  350 L x 150 W x 65 H  19 35
9. UL-70809  400 L x 150 W x 65 H  19 35
10. UL-70810 450 L x 150 W x 65 H  19 35
11. UL-70811 450 L x 200 W x 70 H 19 35
12. UL-70812 500 L x 200 W x 70 H  19 35
13. UL-70813 600 L x 200 W x 70 H  19 35
14. UL-70814 450 L x 250 W x 70 H  19 35
15. UL-70815 450 L x 300 W x 70 H 19 35
16. UL-70816 600 L x 250 W x 70 H  19 35
17. UL-70817 600 L x 300 W x 70 H  19 35
18. UL-70818 750 L x 250 W x 70 H  19 35
ULTRA ERMANENT MAGNETIC CHUCK CLOSE POLE TYPE (HEAVY DUTY)
ULTRA ERMANENT MAGNETIC CHUCK CLOSE POLE TYPE
Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines & also for light milling. 
The working face & bottom face are perfectly parallel. 
Assembled with powerful Magnets. 
Poles individually magnetized for full loading power. 
Magnetic pull is 40-70% more than IS specification. 
Bottom plate has suitable extension to clamp on table. 
Better magnetic grip due to close poles. 
Suitable to hold thin & small jobs. 
Easy operated ON-OFF lever. 
 
Sr.No. Cat No. Size Ploe Gap (mm) Pole Pitch (mm)
1. UL-70901  250 L x 150 W x 65 H  14 30
2. UL-70902  300 L x 150 W x 65 H  14 30
3. UL-70903  300 L x 200 W x 65 H  14 30
4. UL-70904  350 L x 150 W x 65 H  14 30
5. UL-70905  400 L x 150 W x 65 H  14 30
6. UL-70906  450 L x 150 W x 70 H  14 30
7. UL-70907  450 L x 200 W x 70 H  14 30
8. UL-70908  500 L x 200 W x 70 H  14 30
9. UL-70909  600 L x 200 W x 70 H  14 30
10. UL-70910 450 L x 250 W x 70 H  14 30
11. UL-70911 450 L x 300 W x 70 H  14 30
12. UL-70912 600 L x 250 W x 70 H  14 30
13. UL-70913 600 L x300 W x 70 H  14 30
14. UL-70914 750  L x 250 W x 70 H  14 30

ULTRA SPECIAL TYPE CIRCULAR MAGNETIC CHUCK 

ULTRA SPECIAL TYPE CIRCULAR MAGNETIC CHUCK 
Holding device for Rotary surface grinding, light machining, also for Lathe & cylindrical grinding machines. 
The working face & bottom face is perfectly parallel. 
Assembled in powerful Rare Earth Magnets. 
Suitable for thin & small jobs. 
“V” construction design gives better magnetic force. 
Easy operated ON-OFF knob. 
 
Sr.No. Cat No. Size (mm)
1. UL-71012  Ø 75 x 60 H  [3"] 
2. UL-71013   Ø 100 x 60 H  4"] 
3. UL-71014  Ø 150 x 60 H  [6"] 
4. UL-71015  Ø 200 x 60 H  [8"] 

ULTRA TRANSFER BLOCKS

ULTRA TRANSFER BLOCKS
Used as an accessory for magnetic chuck to clamp thin & odd shaped jobs. 
Simplest method of extending the magnetic flux of magnetic chuck with parallel poles to support the job. 
Maximum flux transformation when placed parallel to pole lines. 
Perfectly ground within 5 Micron & supplied in matched pair. 
 
Sr.No. Cat No. Size (mm)
1. UL-71101  50 L x 35W x 100 H 
2. UL-71102  60 L x 30W x 75 H 
3. UL-71103  50 L x 75W x 75 H 
4. UL-71104  50 L x 50 W x 100 H 
5. UL-71105  80 L x25W x 120 H 
6. UL-71106  60 L x 25W x 100 H 
7. UL-71107  50 L x 20W x 100 H 

ULTRA V TYPE TRANSFER BLOCKS

ULTRA V TYPE TRANSFER BLOCKS

Used as an accessory for magnetic chuck to clamp thin & odd shape jobs. 
Simplest method of extending the magnetic flux of magnetic chuck with parallel poles to support the job. 
Maximum flux transformation when placed parallel to pole lines. 
90º V provided for round job. 
Perfectly ground within 5 micron & supplied in matched pair. 
 
Sr.No. Cat No. Size (mm)
1. UL-71201  50 L x 60W x 45 H 
2. UL-71202  110 L x 60W x 45 H 
3. UL-71203  75 L x65W x 35 H 
4. UL-71204  100 L x 65 W x 35 H 
5. UL-71205  60 L 60W x 45 H 

ULTRA HARDENED & GROUND PRECISION ANGLE PLATE 

ULTRA HARDENED & GROUND PRECISION ANGLE PLATE
These angle plates are invaluable for accurate work in 
Tool room, right angle machining & grinding. 
Made from single piece high quality alloy steel. 
Accuracy for Square ness, Flatness & Parallelism 
Within 0.005 mm. 
Hardness - 60 ± 2 Rc. 
Unique design to hold small cylindrical parts also. 
M6 & M8 tapped holes for clamping. 
Three clamps provided for different clamping.
 
Sr.No. Cat No. Size (mm)
1. UL-30801  100 x 100 x 115 

ULTRA HARDENED & GROUND PRECISION ANGLE PLATE - New
These angle plates are invaluable for accurate work in 
Tool room, right angle machining & grinding. 
Made from single piece high quality alloy steel. 
Accuracy for Square ness, Flatness & Parallelism is 
within 0.005mm upto 150L & within 0.010mm upto 300L. 
M6 & M8 tapped holes for clamping. 
Hardness - 60 ± 2 Rc.
 
Sr.No. Cat No. Size (mm)
1. UL-30901  115 x 150 x 150 
2. UL-30902 150 x 150 x 150 
3. UL-30903 150 x 150 x 225 
4. UL-30904 150 x 225 x 300 
Home  |  Profile  |  Products  |  Developments  |  Clients  |  Contact Us  |  Enquiry