Series UL - 836

  • Work holding device for surface grinding machines.
  • Each pole is having separate coil, so/hence very strong & even magnetic flux is generated.
  • Accuracy as per IS : 8710 - 1978.
  • Magnetic pull is 30-50% more than IS specification.
  • Fine Pitch 6.5 mm makes it suitable to hold thin & small jobs.
  • Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
  • Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
  • Chuck is tested for Slippering force, Waterproof test, Temperature rise test, electrical & demagnetizing tests.
  • ALSO AVAILABLE IN LONGITUDINAL POLES.
heavy-duty-fine-pitch-multi-coil-electro-magnetic-chucks request-quote

Sr. No. Cat No. Size ( mm ) Pole Gap ( mm )
1. UL – 83601 450 L x 150 W x 95 H 6.5 ( 5+1.5 ) mm
2. UL – 83602 500 L x 200 W x 95 H 6.5 ( 5+1.5 ) mm
3. UL – 83603 600 L x 200 W x 95 H 6.5 ( 5+1.5 ) mm
4. UL – 83604 600 L x 250 W x 95 H 6.5 ( 5+1.5 ) mm
5. UL – 83605 750 L x 250 W x 95 H 6.5 ( 5+1.5 ) mm
6. UL – 83606 900 L x 250 W x 95 H 6.5 ( 5+1.5 ) mm
7. UL – 83607 600 L x 300 W x 95 H 6.5 ( 5+1.5 ) mm
8. UL – 83608 750 L x 300 W x 95 H 6.5 ( 5+1.5 ) mm
Sr. No. Cat No. Size ( mm ) Pole Gap ( mm )
9. UL – 83609 900 L x 300 W x 95 H 6.5 ( 5+1.5 ) mm
10. UL – 83610 1000 L x 250 W x 100 H 6.5 ( 5+1.5 ) mm
11. UL – 83611 1000 L x 300 W x 100 H 6.5 ( 5+1.5 ) mm
12. UL – 83612 1500 L x 250 W x 100 H 6.5 ( 5+1.5 ) mm
13. UL – 83613 1500 L x 300 W x 100 H 6.5 ( 5+1.5 ) mm
14. UL – 83614 800 L x 400 W x 100 H 6.5 ( 5+1.5 ) mm
15. UL – 83615 1200 L x 400 W x 100 H 6.5 ( 5+1.5 ) mm
16. UL – 83616 1200 L x 400 W x 100 H 6.5 ( 5+1.5 ) mm